UV Curing Plastic Bonding Adhesive
3303 UV Curing Plastic Bonding Adhesive is a light yellow transparent UV adhesive with medium viscosity and fast curing. It provides a quick surface dry (tack-free) finish and good adhesion to a wide range of plastics including PC, PS, ABS, PMMA, PVC and APET. It is recommended for medium-area plastic-to-plastic bonding in assembly and packaging applications.
Technical Specifications
| Color |
Light yellow transparent |
| Viscosity (25°C) |
3200±300 mPa.s |
| Curing Condition |
700 mJ/cm² (UV) |
| Hardness |
Shore D 58 |
| Shear Strength (PC/PC) |
7.5 MPa |
| Shear Strength (PC/PVC) |
6.5 MPa |
| Shelf Life |
12 months (8-28°C) |
Key Features
- Medium viscosity for controlled dispensing and flow
- Fast curing with a good surface dry (tack-free) finish
- Good adhesion to PC, PS, ABS, PMMA, PVC and APET
- Reliable bonding across multiple plastic substrates
- Recommended for medium-area plastic-to-plastic bonding
- High hardness (Shore D 58) for a durable bond
- Consistent performance for assembly and packaging
Applications
- Plastic-to-plastic bonding
- Medium-area plastic assembly
- Bonding of PC, PS, ABS, PMMA, PVC and APET parts
- Consumer electronics and appliance plastic housing
- Display and packaging plastic assembly
Operation and Curing Guide
- Surface preparation: clean the plastic surfaces to remove oil, dust and contaminants for maximum adhesion.
- Dispensing: apply the adhesive evenly to the bonding area.
- Assembly: position and join the parts, pressing to spread the adhesive and removing any excess before curing.
- UV curing: expose the adhesive to UV light at 700 mJ/cm² until fully cured.
- Inspection: verify a uniform bond with a clean, surface dry finish and no bubbles.
- Rework: gently separate bonded parts, clean the surfaces and re-apply the adhesive when repair is needed.
FAQ
Q1: What is the 3303 adhesive mainly used for?
3303 is a UV curing plastic bonding adhesive recommended for medium-area plastic-to-plastic bonding, with good adhesion to PC, PS, ABS, PMMA, PVC and APET.
Q2: Which plastics does it bond?
It provides good adhesion to a wide range of plastics including PC, PS, ABS, PMMA, PVC and APET.
Q3: What does surface dry mean?
The adhesive cures quickly to a good surface dry (tack-free) finish, so bonded parts can be handled sooner after UV exposure.
Q4: Why is medium viscosity useful?
The medium viscosity gives good control for covering medium bonding areas without excessive flow or squeeze-out.
Q5: What bond strength does it provide?
3303 has a Shore D 58 hardness, a shear strength of 7.5 MPa on PC/PC and 6.5 MPa on PC/PVC.
Q6: What are the storage conditions and packaging?
Store at 8-28°C in the original sealed container. Shelf life is 12 months. Available in 1kg packaging.
Product Tags:
|
|
UV Curing Plastic Bonding Adhesive Medium Viscosity Fast Cure Surface Dry for Multi Plastics Images
|
